Finite element limit analysis of load-bearing performance of reinforced slopes using a non-associated flow rule

This paper presents a numerical study on the load-bearing performance of reinforced slopes under footing load using a finite element limit analysis (FELA) method where a non-associated flow rule is assumed in the analysis. The method was validated against results from full-scale model tests and a limit equilibrium (LE) analytical method. A series of parametric analyses was subsequently carried out to examine the influences that the soil dilation angle, footing location, and reinforcement design (i.e. length, tensile strength, and vertical spacing) could have on the load-bearing performance of reinforced slopes. Results indicate that dilation angle has a significant influence on the predicted magnitudes of bearing capacity, slope deformation, and mobilized reinforcement load. The predicted values of bearing capacity using the FELA are smaller than those from the Meyerhof's analytical method for unreinforced semi-infinite foundation, especially for larger friction angle values. Additionally, the ultimate bearing capacity of the slope and its corresponding horizontal deformation increase with the reinforcement tensile strength. Finally, the slip planes under the applied footing load are found to be y-shaped and primarily occur in the upper half of the slope.     

木片筛余物高得率半化学法清洁制浆技术研究

以太阳纸业备料车间木片筛选碎料（筛余物）为原料，对其烧碱法半化学制浆的实验室工艺和生产试验进行了研究。结果表明，筛余物采用半化学法制浆可获得较高得率和环压强度的纸浆，且用碱量对纸浆性能有显著影响。相对8%NaOH （相对于绝干原料）化学预处理，采用14%NaOH化学预处理结合两段浆浓22%的高浓磨浆工艺，所制半化学浆抄造浆张的裂断长和环压指数分别达2.89 km和9.76 N·m/g，是前者的1.9倍和1.2倍，而且优于现用国内OCC废纸浆抄造浆张；生产试验得到的浆张性能指标与实验室相吻合，其中紧度和环压强度分别达到GB/T 13023—2008瓦楞芯（原）纸AA级和A级优等品要求。     

基于改进的Random Subspace的客户投诉分类方法

电信业的客户投诉不断增多而又亟待高效处理。针对电信客户投诉数据的特点，提出了一种面向高维数据的改进的集成学习分类方法。该方法综合考虑客户投诉中的文本信息及客户通讯状态信息，基于Random Subspace方法，以支持向量机（Support Vector Machine，SVM）为基分类器，采用证据推理（Evidential Reasoning，ER）规则为一种新的集成策略，构造分类模型对电信客户投诉进行分类。所提模型和方法在某电信公司客户投诉数据上进行了验证，实验结果显示该方法能够显著提高客户投诉分类的准确率和投诉处理效率。     

Simulation and energy optimization of the stabilizer tower of a pyrolysis gasoline hydrogenation unit

Energy optimization of second distillation tower of a pyrolysis gasoline hydrogenation unit has been studied by the thermal cycle of vapor recompression method. The mentioned cycle is connected to the second distillation tower of the stabilizer of pyrolysis gasoline, and the results are found promising. The composite pinch curve for both the current and the optimized methods are shown. Moreover, an increase in the heat transfer rate in heat exchanger E-1014 causes energy recovery in reboiler. According to simulation results, by vapor recompression to 1970 kPa and using this heat source for thermal integration, condenser and reboiler’s energies are decreased by 56.93 and 30.4 percentage, respectively.     

基于伪布尔模型和启发式算法求解无容量设施选址问题

采用伪布尔模型和启发式算法来求解无容量设施选址问题。首先给出了问题的伪布尔(pseudo-Boolean)表示，然后基于Khumawala规则对问题进行预处理，最后提出两种启发式分支准则来求解问题。实验结果表明所提算法简单有效。     

Slag eye formation in single and dual bottom purged industrial steelmaking ladles

ABSTRACT

Argon gas is often injected from the bottom of the ladle during steel refining operations. The injected gas interacts with the liquid (metal and slag) bath and enhances the momentum, heat, and mass transfer rate in the melt. However, during these gas–liquid interactions, an opening of the slag layer called slag eye is formed, which exposes the molten metal surface to the atmosphere, which is generally undesirable. In the current work, a transient, three-dimensional mathematical model is used to study the turbulent gas–liquid interactions in single as well as dual bottom blown industrial steelmaking ladles. A Coupled Level Set Volume of Fluid (CLSVOF) model is used for tracking the steel-argon, steel-slag, and argon-slag interfaces, from which the slag-eye area has been predicted. It is found that the inlet gas purging rate, melt height, slag layer thickness, angular and radial positions of the gas inlets affect the slag opening area. Non-dimensional empirical correlations are proposed to predict the slag opening area in both single as well as dual purged ladles, using non-linear regression analysis.     

基于数据挖掘的开源电子资源访问行为统计模型

为了解决当前图书馆资源个性化推荐过程中存在推荐的准确率、召回率以及效率较低的问题,采用二维距离模型构建用户社区模型,用于描述访问用户与图书馆开源电子资源之间的关系,并对互联网用户需求和访问行为进行模糊规则推理.依据互联网用户属性和图书馆资源访问需求属性之间的模糊规则,建立图书馆开源电子资源访问行为统计模型,并利用该模型向用户提供个性化推荐服务.仿真结果表明,所建模型的推荐召回率高达98. 4%,推荐准确率为99. 2%,运行时间小于0. 04 s.所建模型能够为互联网用户提供准确、高效地图书馆资源个性化推荐服务.     

Transverse magnetoresistance peculiarities of thermoelectric Lu-doped Bi2Te3 compound due to strong electrical disorder

The n-type thermoelectric Bi_1.9Lu_0.1Te₃ was prepared by microwave-solvothermal method and spark plasma sintering. The magnetic field and temperature dependences of transverse magnetoresistance measured within temperature 2–200 K interval allow finding the peculiarities characteristic for strongly disordered and inhomogeneous semiconductors. The first peculiarity is due to appearance of linear-in-magnetic field contribution to the total magnetoresistance reflected in a crossover from quadratic magnetoresistance at low magnetic fields to linear magnetoresistance at high magnetic fields. The linear magnetoresistance can result from the Hall resistance picked up from macroscopically distorted current paths due to local variations in stoichiometry of the compound studied. The second peculiarity is that both linear magnetoresistance magnitude and crossover field are functions of carrier mobility which is in agreement with the Parish and Littlewood model developed for disordered and inhomogeneous semiconductors. An increase in the mobility due to a decrease in temperature is accompanied by an increase in the magnetoresistance magnitude and a decrease in the crossover field. Finally, the third peculiarity is related to the remarkable deviation of the total magnetoresistance measured at various temperatures from the Kohler's rule. Presence of strong inhomogeneity and disorder in the Bi_1.9Lu_0.1Te₃ structure concluded from the magnetoresistance peculiarities can be responsible for the remarkable reduction in the total thermal conductivity of this compound.